Revert Revert

Sanpress Inox


Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-​wall installations of manifold and riser pipes in Viega component assembly.

Press connectors
All sizes with SC‑Contur - connections, which remain unpressed become visible when the system is filled. The SC‑Contur is certified and fulfils the requirements of DVGW worksheet W 534, Point 12.14, Connectors with forced leakage.
During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.

  • Show more
    Green dot on the press connection

    Sealing elements
    EPDM, black (ethylene-​propylene-​dien-​monomer rubber); up to 110 °C; not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol

    Stainless steel laser-​welded and made of corrosion-​proof stainless steel
    • Material-​No.1.4401 (AISI 316L) (X5CrNiMo 17‑12-2), with 2.3 % molybdenum for increased durability; yellow plugs
    • Material-​No.1.4521 (AISI 444) (X2CrMoTi 18‑2), with PRE-​value 24.1; green plugs

    Standard sizes: d 15; 18; 22; 28; 35; 42; 54 made of stainless steel
    XL sizes: d 64.0; 76.1; 88.9; 108.0 made of stainless steel
    Press connectors with threaded connection made of stainless steel

    Areas of application
    Drinking water
    Heating/Radiator connection
    Compressed air system

    Special applications
    Fire extinguisher systems

    Use of the system for application areas and media other than those described here must be agreed with Viega Service Center.

    Operating conditions
    Drinking water installations
    • Drinking water without restrictions in acc. with DWO
    • Operating temperature max. 85 °C
    • Operating pressure max. 1.6 MPa
    Heating installations
    • Operating tremperature max. 110 °C
    • Operating pressure max. 1.6 MPa
    Irrelevant of the direction of flow, mixed installations are permitted.

    The system components should be protected against high concentrations of chloride generated by both the medium and by external factors.
    Note - Limitations of use heating systems
    Observe VDI 2035 and EN 12828!

    Pipe 1.4521 (d 12–108.0)
    • DW-7301BS0375
    Pipe 1.4401 (d 12–108.0)
    • DV-7301BS0411
    System with pipe 1.4401 (d 15–108.0)
    • DW 8501BL0551
    System with pipe 1.4521 (d 15‑108.0)
    • DW 8501BS0376

    Use of press tools
    The functional safety of the Viega press connector systems is primarily dependent on the perfect condition of the press tools and press machines used. For this reason, for the production of press connections, we recommend the use of Viega press tools and their regular inspection by authorised service points.

    Technical data
    Press connectors and components are constantly being optimised. If required, the current Z and installation dimensions can be obtained from the download area of the Viega homepage:
Our website uses cookies to help you to get the best out of its content, to improve your experience and to collect statistical data. We do not use cookies to create user profiles. Please refer to our Data protection statement for more information